Review: Vanguard SBH-250 Ball Head

I’ve been looking at getting a new tripod head for a little while now.  I’ve been using the one that came with my tripod for over a year and it gets the job done, but it’s definitely lacking a lot of useful features…  I’d been looking at a few different brands, namely Manfrotto, Really Right Stuff and Gitzo to name a few, but they are all pretty darn expensive.  So I did a little digging and came up with Vanguard.  I’d never heard of them but all the reviews were positive and I found one that fit my needs.  So I took the plunge and bought the Vanguard SBH-250 Ball Head.

At $70 it’s significantly cheaper then some of the other heads I’d been looking at so I was a little nervous about where they’d cut corners to get it at that price point.  After using it for a few weeks, I’m now wondering why those others are so expensive!  Seeing as this is only the second tripod head I’ve ever owned, the first specifically bought, I cant say I have much experience in the matter.  Either way, onward and upward!

So, what does $70 get you when it comes to a tripod head, or maybe more to the point, what improvements can $70 buy me? My tripod came with a fairly crappy head.  Like I said before, it got the job done, that’s about it.  When I twist the lever to lock the head down, I had to point the camera higher then where I wanted it due to the large amount it would settle.  If I wanted to pan, I’d have to loosen and recompose.  It was frustrating to say the least…  It states that it can only hold 8.8lbs, and I think it might be less then that.  So, how does the SBH-250 improve?

Loading:  The SBH-250 states that it can hold 44lbs.  I haven’t tested that and never plan to…  The heaviest combination I could see having on there would be maybe 10lbs (camera + grip+flash+70-200) and it seems like it’s plenty strong enough.

Stability:  Once that head is locked down, it doesn’t budge!  It has two head adjustment knobs.  The one on the left in the first image controls the resistance when it’s unlocked.  The one on the right locks it down.  It only takes a 90 degree turn to lock down.  All of the knobs have a really nice solid feel to them and seem to have tight tolerances.  The resistance adjustment is really nice, I can calibrate the unlocked resistance to the weight mounted so when I unlock it it wont move unless I move it (so I could potentially do it with one hand!).

Rotation:  Probably the reason I wanted a new tripod head in the first place was for the ability to rotate without unlocking the head.  This head has a knob in the back to adjust the tension for rotation and degree markings every 5 degrees.  Again, the rotation motion is really smooth and the tension knob locks it down in about 180 degrees (no resistance to full resistance).  At full resistance the head unscrews off of the body before budging…

Plate:  This is where the camera attaches to the camera.  It’s a lot slimmer then my previous head.  If I had to say I had a gripe with this tripod head, I think it’d be here.  It appears that to make plate slimmer they made it more difficult to remove.  You’ll need to have a screw driver, a coin, a key or some other tool to take it off.  Not a deal breaker by any means, but kinda annoying.  The plate attaches firmly to the camera and the non-skid pads make it so it doesn’t move when tightened.  The plate attaches to the head by sliding in from one side or the other.  There is a locking pin in the head that is depressed by the sloped channels of the plate so it slides on easily.  Once on, the pin keeps it from coming off.  You press that orange button to lower the pin.  The knob that locks the plate in place only takes a 45 degree turn.  There are two bubble levels build into the head to help level it.  They work as expected.

Misc:  It also comes with an extra plate which I thought was a nice touch.  It comes with an adapter that reduces the standard 3/8″ attachment thread down to a 1/4″ thread where you attach to the tripod.

Conclusion:  For only $70, I can’t see how you could go wrong.  Everything feels solid, seems to be made very well.  The only thing left to do now is use it.  I’ll update this post if it starts to wear out in anyway.

Pros:  It’s inexpensive and seems very well made.  All the adjustment knobs work smoothly and take less then a half turn.  It seems very strong, I’m working on a DIY nodal point head and it can hold the additional weight with no problem.  When I get the D800 and slap a 70-200 on there we’ll see how it holds up, but I don’t see that being a problem…

Cons:  The screw for the plate requires a tool.  Really only a problem if you’re lazy like I am.

Now I just need to get a better tripod!

As usual, if you have this head or have used it, feel free to comment with your opinion.

3 thoughts on “Review: Vanguard SBH-250 Ball Head

  1. I’ve found vanguard products to be very well built. I use the Vanguard ABH-230K ball head and its solid. It doesn’t creep even with a 70-200 f2.8 on the Pentax K-5 with a grip.

  2. I am thinking in buying a Vanguard ball head SBH-250..and use it with my nikon lens 70-200 ..the question is would be any problem if I sit the lens using the collar lens???


    • I would recommend using the lens collar, especially if you’re mounting the 70-200 f/2.8. If its the f/4 one, you probably wouldn’t need it unless its a lower end body with a plastic frame…

Leave a Reply to David C. Kleinot Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: